Auto Configuration for SCCP VGs

a lot of people don't know you can autoconfigure vg202s (and 204s and 224s) not only when using mgcp but also when using sccp.
Unfortunately it is not zero touch, so you need to put some commands in before deploying the device.

1.)Put the device into the ccm. Otherwise there won't be a config file on the TFTP to download for the device :-)

2.)device needs an ip, either via dhcp or statically. let's assume dhcp

3.)If you have set option 150 for the dhcp pool in quedtion you just need the following comminds

sccp local <interface>, e.g. sccp local fas 0/0

ccm-manager sccp

4.)if you don't have option 150 set or no dhcp you need to tell the box where the ccm is:
ccm-manager sccp

ccm-manager config server <tftp server>

that's it
works like a charm.